gunmodel: BS-6 Mk2 (GNS)
Name: Anonymous
Date: Sunday, February 05, 2006
Time: 10:53:34 PM
I was wondering if it would be possible to use the idea you had for your bullpup rifle on the GSN, to make a revolver?
gunmodel: BS-1 (BASR)
Name: Anonymous
Date: Monday, February 06, 2006
Time: 03:01:15 PM
How does your magazine clip work?
gunmodel: BS-1 (BASR)
Name: Malcolm
Date: Monday, February 06, 2006
Time: 05:27:20 PM
Why do the darts set near the rifle in some of the pictures have such a strange lok about them? Also how did you round the tips of them?
gunmodel: BS-1 (BASR)
Name: Flurry
Date: Tuesday, February 07, 2006
Time: 01:35:17 PM
I looked everywhere for 1 inch 200 psi pvc and cant find it. could you aid me on my quest? Secondly im going to try and make a rifle, a cross between the F.A.R and the Bs-1 with surgical tubeing to hold the air(the stuff in the powerclip or if you have ever seen a paintball grenade, its that type of tubeing. I hope to make it in the near future. I am also in search of a valve similar to the one you built on the Bs-7. Do you know if they make that sort of valve in some form. I was not exactly sure where to put this but i would appreciate your help, thanks
gunmodel: BS-5 (FAR)
Name:
Date: Tuesday, February 07, 2006
Time: 02:07:35 PM
What size chamber did you use for the plunger to move through (also I'm guessing you used PVC for it, but if you used something different what was it).
gunmodel: BS-7 (BTR)
Name: Cheesenerfer (NerfHaven)
Date: Tuesday, February 07, 2006
Time: 06:48:48 PM
Not much of a question but I was recently looking at your BTR design and I would like your permision to make a slight variant of it. I was originally planning on using a airtech4000 barrel rotation piece but have decided to go with a single shot. I am also planning on using a bladder from a rf20 to achieve a high rof. I you are ok with it I would love to build and of course give you design credit.
gunmodel: BS-7 (BTR)
Name: Cheesenerfer
Date: Tuesday, February 07, 2006
Time: 06:58:52 PM
How exactly do you glue your pvc handle to the main frame of the gun in a way that will keep it from braking off?
gunmodel: BS-4 (SCP)
Name: Anonymous
Date: Wednesday, February 08, 2006
Time: 02:45:04 PM
How do you cock the scp?
gunmodel: BS-1 (BASR)
Name: Anonymous
Date: Thursday, February 09, 2006
Time: 06:30:31 PM
hey, I was just wondering if you could put up videos of the BS-1 being fired and cycled a few times. Im sure others would also enjoy watching it in action
gunmodel: BS-1 (BASR)
Name: flurry
Date: Sunday, February 12, 2006
Time: 02:14:36 PM
What type of valve did you use on the original BS-1 when you were running compressed air? Was the valve itself practical, as in was it as good as an airtech 2k valve?
gunmodel: BS-5 (FAR)
Name: chip
Date: Saturday, February 18, 2006
Time: 06:48:09 AM
How much would you want for if you build me a far. Cause I'll pay for the materials plus a little bit more for building it. Also is it reasonable price?
gunmodel: BS-1 (BASR)
Name: Anonymous
Date: Sunday, February 19, 2006
Time: 10:43:35 AM
Enter your question here.....
gunmodel: BS-5 (FAR)
Name: ARRAider14
Date: Sunday, February 19, 2006
Time: 10:54:12 AM
dear Boltsniper, I was wondering where and how you aquired the spring( you didn't give any specifics of if you can buy this spring ina store or I have to aquire the spring like you did and if the springs in the FAR are actual gun springs or just normal easy to get springs. and just to say i don't know about modifing or building nerf guns i just ran across your design
gunmodel: BS-5 (FAR)
Name: Anonymous
Date: Sunday, February 19, 2006
Time: 07:57:27 PM
dear sniper is there any way to purchase a AR15 spring without having to order it online like is it possible to find it in a local gun store?
gunmodel: BS-5 (FAR)
Name: Anonymous
Date: Sunday, February 19, 2006
Time: 08:43:11 PM
for the springs for the FAR do you have to use a AR15 full rifle length spring or is there another spring that can work?
gunmodel: BS-5 (FAR)
Name: Anonymous
Date: Sunday, February 19, 2006
Time: 08:53:47 PM
how did you aquire your main spring?
gunmodel: BS-1 (BASR)
Name: Anonymous
Date: Sunday, February 19, 2006
Time: 08:58:24 PM
out of all the rifles you have made which one was more time consuming and which one was the most expensive
gunmodel: BS-5 (FAR)
Name: flurry
Date: Tuesday, February 21, 2006
Time: 08:55:52 PM
I was just wondering, have you ever thought about some how makeing the plunger tube brass,but some how still outlineing the brass in pvc so it continues to function normaly. If so do you think the brass would make a difference in performance.
gunmodel: BS-1 (BASR)
Name: Anonymous
Date: Wednesday, February 22, 2006
Time: 02:42:29 PM
How does having access to a University and it's equipment have an effect on all of these projects? Are there any resources not yet utilized in your univeristy that you would like to use in the future??
gunmodel: BS-2 (XCC)
Name: chickenboy
Date: Wednesday, February 22, 2006
Time: 03:44:19 PM
what are all the parts of the xcc, btr, and gns u dont tell every thing at the materal list?
gunmodel: BS-5 (FAR)
Name: Kavu
Date: Sunday, February 26, 2006
Time: 09:05:48 AM
How big are your screws for the FAR?
gunmodel: BS-6 (GNS)
Name: MrFeetio
Date: Monday, February 27, 2006
Time: 10:53:43 AM
I cant get anything to download about this gun? I need the plans. Do you make these and sell them? you should sell them on ebay. I want to know about how much this gun cost to make. thx MrFeetio
gunmodel: BS-5 (FAR)
Name: Anonymous
Date: Tuesday, February 28, 2006
Time: 05:39:26 PM
Did you ever use SCH40 piping in your FAR rifle?
gunmodel: BS-7 (BTR)
Name: Spider-Waffle
Date: Wednesday, March 01, 2006
Time: 10:37:42 PM
You said "That's why initially I slated BS-7 as compressed air powered. The more and more I think about it the more and more I veer from it." Why is this?
gunmodel: BS-6 (GNS)
Name: Anonymous
Date: Thursday, March 02, 2006
Time: 08:11:52 AM
the videos aren't opening. your work is amazing!
gunmodel: BS-1 (BASR)
Name: Anonymous
Date: Saturday, March 04, 2006
Time: 10:27:06 AM
how do you make the magazine
gunmodel: BS-5 (FAR)
Name: Anonymous
Date: Saturday, March 04, 2006
Time: 10:27:15 AM
how do you make the magazine
gunmodel: BS-1 (BASR)
Name: Anonymous
Date: Saturday, March 04, 2006
Time: 12:37:18 PM
ur da shit
gunmodel: BS-5 (FAR)
Name: justin from Nhq
Date: Monday, March 06, 2006
Time: 05:51:59 PM
What did you hold everyting together with? All screws or maybe some type of glue? I'm also using a thin wood that is pretty sturdy for some of the parts of the gun that PVC wont work on so if you have any suggestions of a type of glue or something(it is too thin for screws)that wont glob too much so it will still look nice.
gunmodel: BS-3 (STD)
Name: Anonymous
Date: Friday, March 10, 2006
Time: 08:33:27 PM
Why did you name it STD?
gunmodel: BS-5 (FAR)
Name: Jeremy
Date: Saturday, March 11, 2006
Time: 02:05:39 PM
How exactly did you get the shells to eject, i have tossed around a few ideas but i am not really sure.
gunmodel: BS-5 (FAR)
Name: Anonymous
Date: Saturday, March 11, 2006
Time: 07:04:27 PM
Is this gun hard to make?
gunmodel: BS-6 (GNS)
Name: Anonymous
Date: Saturday, March 11, 2006
Time: 09:50:55 PM
What is the "music wire" in the GNS master parts list for the chargng handle?
gunmodel: BS-6 Mk2 (GNS)
Name: Commonlyhunted
Date: Sunday, March 12, 2006
Time: 10:32:42 PM
I would vary much like to use some of your wonderful pictures for a school project. All of the pictures I am eyeing are cad drawings, expanded views of guns, and some unpainted ones (don't want to scare the teachers...). The project is of a business to start... and mine is about making costom nerf "blasters." thanks.
gunmodel: BS-1 (BASR)
Name: Anonymous
Date: Monday, March 13, 2006
Time: 07:44:18 PM
I'm curious as to where the CO2 tank actually is in the BS-1 as I'm interested in building a gun that uses CO2 for power. Any suggestions would also be appreciated as I'm scared of it literally blowing up in my face.
gunmodel: BS-5 (FAR)
Name: Jeremy
Date: Saturday, March 18, 2006
Time: 04:19:59 PM
What are the demensions of the AR15 spring.
gunmodel: BS-5 (FAR)
Name: Anonymous
Date: Saturday, March 18, 2006
Time: 04:54:14 PM
I looked for the AR15 spring and there is one that says rifle and one that says carbine which one did you use.
gunmodel: BS-5 (FAR)
Name: Anonymous
Date: Saturday, March 18, 2006
Time: 04:59:13 PM
Is the FAR hard to cock? That spring seems massive.
gunmodel: BS-5 (FAR)
Name: David
Date: Monday, March 20, 2006
Time: 09:47:03 PM
Enter your question here.....
gunmodel: BS-5 (FAR)
Name: David
Date: Monday, March 20, 2006
Time: 09:49:14 PM
Where did you get the AR15 Rifle length Action Spring?